STM32 DFU BootLoader HowTo

Video created by Gidi M Employee on May 23, 2017

    In this video, you will see how to program the STM32 with USB DFU if its available.

    The Links that are mentioned in the video are:
    AN2606 from ST:
    http://www.st.com/content/ccc/resource/technical/document/application_note/b9/9b/16/3a/12/1e/40/0c/CD00167594.pdf/files/CD00167594.pdf/jcr:content/translations/en.CD00167594.pdf

     

    ST Nucleo Board user manuel:
    http://www.st.com/content/ccc/resource/technical/document/user_manual/98/2e/fa/4b/e0/82/43/b7/DM00105823.pdf/files/DM00105823.pdf/jcr:content/translations/en.DM00105823.pdf

     

    Nucleo Pinout:
    https://developer.mbed.org/platforms/ST-Nucleo-L476RG/

     

    STSW-STM32080  - DfuSe USB device firmware upgrade STMicroelectronics extension: contains the demo GUI, debugging GUI, all sources files and the protocol layer (UM0412)
    http://www.st.com/en/development-tools/stsw-stm32080.html

     

    Geekcreit® 310Pcs 2.54mm Male Female Dupont Wire Jumper With Header Connector Housing Kit
    https://www.banggood.com/Geekcreit-310Pcs-2_54mm-Male-Female-Dupont-Wire-Jumper-With-Header-Connector-Housing-Kit-p-1063303.html

     

    SN-48B AWG26-16 Non-Insulated Pin Crimper Tool 0.14-1.5mm2 for Dupont:
    https://www.banggood.com/SN-48B-AWG26-16-Non-Insulated-Pin-Crimper-Tool-0_14-1_5mm2-for-Dupont-p-961535.html