I have a question about the ST-Link debugger/programmer.
Can it be used with any Cortex-M MCU from other manufacturers or is somehow specific to the STM32 family?
Thank you in advance for your support.
Hi Stathis Voukelatos ,
The ST-LINK debugger and programmer is specific for the STM8 and STM32 microcontroller families.
IMHO at least worth a try.
About three years ago, I successfully flashed and debugged an NXP1343 (Cortex M3) with a severed on-board ST-Link.
However, the firmware (and hardware) changed at the meantime. Not sure if that still holds with current versions ..
Both OpenOCD - Open On-Chip Debugger download | SourceForge.net and GitHub - texane/stlink: stm32 discovery line linux programmer know the Stlink and can debug/program also a lot of other devices via SWD.
You can also reflash https://embdev.net/articles/STM_Discovery_as_Black_Magic_Probe#F429Discovery_board_doesn.27t_enter_System_DFU_bootloader the stlink as a Black magic debug probe Home · blacksphere/blackmagic Wiki · GitHub
Retrieving data ...