i am working with STM32_MAT-TARGET in external mode i can generat project
STM32_MAT-TARGET in external mode
Mandatory Software :
matlab 2016 b
Keil version V 5.23
in the external mode : make sure that HeapSize must behigher as possible.
make sure that the configuration of UART(Rx,Tx) in your stm32 it is connected to the USB (VCP_TX ,VCP_RX)
Hi abdou si,
Could you please precise the STM32-MAT/TARGET and Keil version are you using ?
I suggest you to debug, identify what is the problem that you see and when it occurs or where the code hangs/stop.
I recommend you to follow the instructions in the attached document "STM32 MAT-TARGET HandsOn" it may help you on your project.
i am working with KEIL V5 and STM32-MAT/TARGET 4.4.1 in matlab 2016b i am alos working with STM32_MAT-TARGET_HandsOn
i took this exemple
i build it in external Mode i get this
Could you please share your .ioc file as well the log files that can be found in your user directory under the .stm32cubemx folder.
this for may application i am using GPIO in stm32f303k8
I will share your issue internally to our CubeMx team for further investigation and come back to you as soon as possible.
whene i start the building i get this ioc file
Which version of Keil are you using ? Try to update Keil tools (last version V5.23) if you are using an old version.
i am already using the 5.23 V
i wanna try with older version of STM32_MAT-TARGET for matlab 2015 b but i cant download can you help ?
How i can download STM32-MAT/TARGET 4.4.0
You can find attached the previous version STM32-Mat/TARGET V4.4.0 as you asked.
But, I recommend to you using the latest version of STM32-MAT/TARGET which contains enhancement as ST maintains its support only for the last version of STM32Mat/TARGET available on the ST web.
I have copied your .ioc file in new folder and the project is successfully generated.
So, I think that the problem is related to your configuration setting with Keil.
i can generated a project with .ioc but the problem when i use simulink externel mode i cant generat project you can see the PDF STM32_MAT-TARGET_HandsOn_v1_0.pdf page 90
we aren't able to reproduce this error !
Please check that you are correctly configure Simulink Model Setting to use the correct parameters and the last version of CubeMx V4.20 (as mentioned in the attached document, in "Simulink Model Setting" section)
thanks it is work
Retrieving data ...