AnsweredAssumed Answered

STM32 project in Coo-cox with GNU Tools ARM Embedded

Question asked by Md Mubdiul Hasan on Dec 6, 2016
Latest reply on Dec 22, 2016 by Md Mubdiul Hasan

Dear All,

 

I want to have attention those who has experience on using coo-coox, I am writing here because coo-cox forum does not respond  for successful  logon.

 

My board is custom one  build with centered 32F070RBTx,

The version is 

CooCox CoIDE

Version: 1.7.8

 

 

Along with GNU Tools ARM Embedded\4.7 2012q4\bin, the following errors take place ,

 


[cc] arm-none-eabi-gcc -mcpu=cortex-m3 -mthumb -Wall -ffunction-sections -g -O0 -c "-DC:\Program Files (x86)\GNU Tools ARM Embedded\4.7 2012q4\bin" -IC:\STM32_toolchain\Workspace\Source_bak\cmsis_boot -
[cc] from C:\STM32_toolchain\Workspace\Source_bak\common\Inc/stm32f0xx_hal_conf.h:184,
[cc] from C:\STM32_toolchain\Workspace\Source_bak\common\Drivers\STM32F0xx_HAL_Driver\Inc/stm32f0xx_hal.h:48


[cc] C:\STM32_toolchain\Workspace\Source_bak\components\coocox-master\cmsis_core\source/core_cm0.h:214:14: error: 'Program' undeclared here (not in a function)
[cc] C:\STM32_toolchain\Workspace\Source_bak\components\coocox-master\cmsis_core\source/core_cm0.h:214:5: error: bit-field '<anonymous>' width not an integer constant
[cc] C:\STM32_toolchain\Workspace\Source_bak\components\coocox-master\cmsis_core\source/core_cm0.h:214:14: error: expected ',', ';' or '}' before 'Files'
[cc] C:\STM32_toolchain\Workspace\Source_bak\components\coocox-master\cmsis_core\source/core_cm0.h:214:14: error: stray '\' in program
[cc] C:\STM32_toolchain\Workspace\Source_bak\components\coocox-master\cmsis_core\source/core_cm0.h:214:14: error: stray '\' in program

 

 

 

1. Does it a problem for wrong version selection  for  CMSIS?

2. Is it a linking problem?

3. Do you want me to change build configuration  and include all HAL library ? My device package is not  available in Configuration database of Coo-cox.

 

KIndly take a look this view.wrong in Coo-coox

Outcomes