AnsweredAssumed Answered

STM32F3Discovery fails to program

Question asked by diakonov.igor on Aug 8, 2015
Latest reply on Aug 10, 2015 by 68516
When I try to program my board using OpenOCD 0.8.0, I've get:
Open On-Chip Debugger 0.8.0 (2014-10-25-15:24)
Licensed under GNU GPL v2
For bug reports, read
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
Info : This adapter doesn't support configurable speed
Error: open failed
in procedure 'transport'
Runtime Error: extra/stm32f3-openocd.cfg:5: 
in procedure 'script' 
at file "embedded:startup.tcl", line 58
in procedure 'init' called at file "extra/stm32f3-openocd.cfg", line 5

More detailed report of the command
'strace openocd -f board/stm32f3discovery.cfg -f extra/stm32f3-openocd.cfg -c "stm_flash `pwd`/main.bin" -c shutdown' is here.

Here is my stm32f3-openocd.cfg .

How to do total hard reset?