// Configure the clock. The external clock runs at 4 Mhz, and we want a speed of 32 Mhz, so we will run
// the system off of the PLL1 clock. CLK2 will run at 2 Mhz, so we need a multiplier of 16. To get this,
// we multiply by 16, and divide by 1. We will run all systems at the default clock, which has no divider.
RCCU_PLL1Config (RCCU_PLL1_Mul_16, RCCU_Div_1);
// configure the device to run using the PLL clock.
// initialize the free packet queue
Retrieving data ...