Hello, this is my first time asking something in here.I'm trying to create a USB PD consumer application on STM32G071B Discovery board.I've created a USB PD project in STM32 Cube MX.Many critical functions relating to USB PD have no content.Downloada...
I'm trying to implement USB AUDIO IN class for my project. I've found such class in en.X-CUBE-MEMSMIC1 package, and as somebody sugested i've replaced usbd_audio.c/.h files with usbd_audio_in.c/h from this package, and changed usbd_audio_if.c/.h cont...
Dear all,I would like to generate some very simple sounds using the WM8994 audio codec on the stm32h750 discovery board. I have seen the examples from the stm32Cube repository as well as some examples from C. Noviello. Unfortunately, I am struggling ...
I am finding some ways to detect USB cable is plugged in or not and I found the PLTS seems to fulfill my requirements.After some experiments, value of PLTS is 3 and other values will appear if cable is plugged in.However I cannot understand what is t...
Hi Yohann,Created a separate thread as it's a separate issue.I am having an interesting problem with the latest USB PD library v3.I configured my board to be a source and connect to my Samsung phone (A20); it works very happily, I can start charging ...
Hi there,We have a custom board with STM32F030CC and PTN5110 chip as the TCPC. We are using the x-cube-usb-pd library with config USBPD_TCPM_LIB_PD3_CONFIG_1.Initially, DRP role is selected. When we plug in a standard USB-C charger (5V 3A output) to ...
Hi, I am developing a USBPD system with STM32G071KBU6N. This MCU has a USBPD port. I am trying to use it to build a PD SNK port to get a PDO 20V/3A, 12V,3A,, 5V/3A. However, the code was stuck in the Hardreset section. In the debug section, When the ...
Hi everyoneI want use STM32F746-DISCO audio unit.I want make a application whit touchGFX which also has audio output.What are the solutions for audio output?
There is inconsistency in the reference manual and the STM32CubeMX clock configuration tool as to what the maximum clock for the PLL DSI. Reference manual suggests it is 1000 MHz however, when set to that in STM32CubeMX, an error is generated at the...