Ask questions and find answers on STM32Cube packages, including HAL, LL and middleware, and expansion software.
I'm developing a program and we want to be able to flash it via bootloader in production with a UARTTo do that, we are using a NUCLEO-F302R8 board to flash a custom board with a STM32G0B1 following this post: https://community.st.com/t5/stm32-mcus/ho...
Hardware environment: STM32 Nucleo-64 development board with STM32C071RB MCU.Software environment: Bare-metal operation without RTOS.I am currently working on a USB composite device without an RTOS. Previously, I used STM32CubeMX to generate and modi...
Starting from a working application based on the STM32U585A microcontroller, we changed the CPU to have the ETHERNET peripheral available. The flash is connected via quadSPI to the microcontroller, while the RAM is connected via octospi .Microcontrol...
Hello, I would like to know the H264 VENC performance for the STM32N6 using the ST example: STM32Cube_FW_N6_V1.1.1/Projects/STM32N6570-DK/Applications/VENC/VENC_RTSP_ServerI have a hardware setup with a nucleo-n657x0-q + a ST B-CAMS-IMX camera module...
Heyho,not really a bug, but the register ETH_MACCSRSWCRis missing in the struct ETH_TypeDef, in the CMSIS / STM32H7 header files, at least for H723 .. H735.Also checked the github repos.Any specific reason for that?
hey @m.beddi , have you find the solution . i am struck at this too. edit : to reformulate the issue Issue description : I am trying to implement the MSC_Standalone example (USB device mode with SD card) on the STM32469 Discovery board using CubeMX (...
when i make the macro LUDWIG_SAI_DMA_MODE 0 i can hear audio in continous loop without noise because it runs in blocking mode.when give 1 to LUDWIG_SAI_DMA_MODE, I can able to hear the audio for sometimes after that i hear noise. When i hear noise i...
Hello,I use a STM32F777 with FreeRTOS and LwIP. I also run a display control with TouchGFX and partial framebuffer via SPI. I have configured the Ethernet and LwIP as shown in the following link: https://community.st.com/t5/stm32-mcus/implementing-a-...
I have an issue where a HAL_I2C_Mem_Read_IT transaction just seems to hang. It is plausible that this peripheral is temporarily unavailable and I already have working retry logic for the case where this call returns the "AF" error. The hang may or ...
I would like to highlight a compatibility issue we have encountered. The TL-SG116E is a smart managed switch, whereas our machine, which uses an STM32 F7 Nucleo board, is designed to operate with an unmanaged switch. As a result, we are experiencing ...
