STM32 MCUs Security

cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Missing CMOX_AESFAST_CFB_DEC_ALGO

In the X-CUBE-CRYPTOLIB v4.1.0, the documentation say that cmox_cipher_decrypt() accept the CMOX_AESFAST_CFB_DEC_ALGO as algo. But CMOX_AESFAST_CFB_DEC_ALGO is not defined, instead there is a CMOX_AESFAST_CFB_DEC_ALG in cmox_cfb.h.

nicolas by Associate III
  • 54 Views
  • 2 replies
  • 0 kudos

SBSFU intrusion

HiI'm using the SBSFU example for the STM32U5 microcontroller. After an intrusion, the board enters a locked state. Is there a way to receive a notification when an intrusion occurs and another when it has ceased, indicating that the board can return...

How to read the STSAFE_A110 serial number

Hi I have the project with the chip STSAFE_A110I don't need to development the application I just need to confirm the hardware is ok, for example, obtained the sn of the chip is successfully or other wayI don't want to add the stsw-safea1-mw to my pr...

dylanou_0-1713604004224.png
dylanou by Associate II
  • 92 Views
  • 7 replies
  • 0 kudos

Resolved! STM32U585 DOES NOT RETURN TO RDP=0.

Hello,I've added the OEM2KEY AND OEM1KEY to the RDP Level 2 protection in order to perform the same steps as in the 'Getting started with STM32CubeU5 TFM application' for enabling Production Mode.Following the steps and executing the HARDENING.SH fil...

Istillaga_0-1713193265654.png

Crypto Library

Hi @Jocelyn RICARD I would like to generate Certificate Signing Request in my STM32H5 board, can i know which library i can use and share any document or example project 

same-bank exitSecureArea details on h755

Hello,I have two applications: one at 0x08000000 and one at 0x08080000. Both run fine individually (when setting the boot config bytes to the fitting offset). Now I want to use the one at 0x08000000 as secure area and escape it by using exitSecureAre...

smnhff by Associate II
  • 150 Views
  • 6 replies
  • 1 kudos

usage fault occored at STL_SCH_RunFlashTM()

rtos: zephyrMCU: STM32H723VET6Package: en.x-cube-classb-h7 v4.0.0I‘m working on make my program running on H7 to meet the requirements of Class B.The CPU and RAM test works well both on startup and run-time. I haven't prepared the CRC precalculated a...

newbeea_0-1713333962367.png newbeea_2-1713334424024.png newbeea_1-1713334208273.png
newbeea by Associate
  • 70 Views
  • 1 replies
  • 0 kudos

Newlib 3.3.0 vulnerability

Hello,I have a project created with STM32CubeIDE that includes FreeRTOS.A Black Duck vulnerability scan was made on this project and a single vulnerability (CVE-2021-3420) was detected.This vulnerability describes a flaw in Newlib 3.3.0 (all versions...

Resolved! Porting STM32CubeExpansion_Cloud_AWS to STM32H563ZI

Hello everyone, I hope you are well.I'm working on a project and one of the requirements is connection to AWS, so I chose to start with the STM32H573I-DK kit, where following the "STM32CubeExpansion_Cloud_AWS_H5_V1.0.0" step by step I managed to conn...

ffjunq by Associate II
  • 80 Views
  • 2 replies
  • 0 kudos