HelloLast week I received the ST25RU3993-HPEV devlopment kit. I have already downloaded the SDK and tried it out. Unfortunately, I have not found any information on how to write firmware for the board myself. Is that even possible? Or is there a way ...
we are observing weird error during initilization...enclosed the log dump (board2_init_fail_log.txt and ll13_01_board2_success_logs.txt)on Raspberry pi with 2 NFC03A1 boards (SPI3.0 works well, SPI0.0 fails)2 independent binaries are being used with ...
Hello, I have a ST25R3916B project that is working fine, largely based around the demo_polling.c application. We use one '3916B and switch between different antennas. Each time we switch obviously the RF characteristics change a little, so I'd like...
I recently purchased a STEVAL$25R3916BA evaluation kit because I was given to understand that this had a 64-bit DLL available, whereas the older 3911-based kit didn't.However as I have started to write code based on the DLL, I have found it is actual...
Hello,I have made a custom RFID reader board design which is similar to the X-NUCLEO-NFC08A1. However, it powers antennas in single ended mode with a cable through a u.fl connection. I am running the example code for the X-NUCLEO-NFC08A1 on this cust...
I have tested ST25DV16KC Type 5 NFC Tags in out products using ST25 NFC mobile application.For automating my testing process using PC based utilities, I am looking for NFC Type 5 card readers which will support your ST25DV16KC IC.Previously I have us...
The KC chips made breaking changes to some configuration registers, but v2.3.1 of the ST25 Tag Editor has no option for the KC variant, so some configuration registers are read/written incorrectly.
Hi there!I'm working on a Windows console application which uses ST25R3911DISCOComm DLL to communicate with ST25R3911B-DISCO board to process a ISO 14443A card (ST25R3911DISCOComm DLL is located in ST25R3911B_Discovery_GUI App installation directory)...
Hello,We are using ST25R3920B as NFC reader for our project. In order to implement the functionality we integrated the nfc RFAL driver provided from ST. We need to develop the software with respect to ASPICE guidelines. I would like to ask whether th...
I've downloaded the NFC Tap app and on my Iphone 8 it is not possible to start the FTM Demo because directly when I try to start it the strange overlay appears and then the app crashes and is not usable. It is the newest version.Furthermore, I was no...
