cancel
Showing results for 
Search instead for 
Did you mean: 

Run target on STM32H747I-DISCO failed

victagayun
Senior III

please refer to this..

https://community.st.com/s/question/0D53W00000O1KHJSA3/run-target-on-stm32h747idisco-failed

when I use 2.5.0 i get this

Run Target
    Generate
        Wrote generated/gui_generated/src/main_screen/MainViewBase.cpp
        Done
    Generate Assets
        make -f simulator/gcc/Makefile assets -j8
        Converting images
        Reading ./application.config
        Done
    Post Generate
        touchgfx update_project --project-file=simulator/msvs/Application.vcxproj && touchgfx update_project --project-file=../EWARM/TouchGFX.ewp
        Done
    Compile
        make -f ../gcc/Makefile -j8
        STM32CubeProgrammer is placed in Program Files
        STM32CubeProgrammer is placed in Program Files
        Converting images
        Reading TouchGFX/application.config
        STM32CubeProgrammer is placed in Program Files
        Compiling TouchGFX/generated/gui_generated/src/main_screen/MainViewBase.cpp
        Linking TouchGFX/build/bin/target.elf
        Producing additional output formats...
          target.hex   - Combined internal+external hex
          intflash.elf - Internal flash, elf debug
          intflash.hex - Internal flash, hex
          extflash.bin - External flash, binary
        Done
    Flash
        make -f ../gcc/Makefile -j8 flash
        STM32CubeProgrammer is placed in Program Files
        STM32CubeProgrammer is placed in Program Files
        Converting images
        Reading TouchGFX/application.config
        STM32CubeProgrammer is placed in Program Files
        Linking TouchGFX/build/bin/target.elf
        Producing additional output formats...
          target.hex   - Combined internal+external hex
          intflash.elf - Internal flash, elf debug
          intflash.hex - Internal flash, hex
          extflash.bin - External flash, binary
        STM32CubeProgrammer is placed in Program Files
              -------------------------------------------------------------------
                               STM32CubeProgrammer v2.5.0                  
              -------------------------------------------------------------------
        
        ST-LINK SN  : 003100173137511539383538
        ST-LINK FW  : V3J7M2
        Board       : STM32H747I-DISCO
        Voltage     : 3.23V
        SWD freq    : 24000 KHz
        Connect mode: Normal
        Reset mode  : Software reset
        Device ID   : 0x450
        Revision ID : Rev V
        Device name : STM32H7xx
        Flash size  : 2 MBytes
        Device type : MCU
        Device CPU  : Cortex-M7/M4
        
        
        
        Memory Programming ...
        Opening and parsing file: target.hex
          File          : target.hex
          Size          : 3622108 Bytes
          Address       : 0x08000000 
        
        
        Erasing memory corresponding to segment 0:
        Erasing internal memory sector 0
        Erasing memory corresponding to segment 1:
        Erasing internal memory sectors [0 1]
        Erasing memory corresponding to segment 2:
        Erasing external memory sectors [0 25]
        Download in Progress:
        ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± 0%
        ÛÛÛÛÛÛÛ 14%ÛÛÛ 20%ÛÛÛÛÛÛÛ 34%ÛÛÛÛÛÛÛ 48%ÛÛÛÛÛÛÛ 63%ÛÛÛÛÛÛÛ 77%ÛÛÛÛÛÛÛ 91%ÛÛÛÛÛ 100%
        
        File download complete
        Time elapsed during download operation: 00:00:10.814
        
        Hard reset is performed
        Done
    Done

any reason why?

0 REPLIES 0