FAQs
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

A lot of errors in STM32Cube_FW_F0_V1.11.0

TNaxi
Associate II

‎2019-11-26 05:40 PM

Error 1:

MX version: STM32CubeMX 5.4.0

Firmware: STM32Cube_FW_F0_V1.11.0

Compiler: IAR

MCU: Any in F0 series

Compiling error:

Error[Pe147]: declaration is incompatible with "__interwork __softfp void assert_failed(uint8_t *, uint32_t)" (declared at line 308 of "… main.c�?

Analysis:

The function, assert_failed(), generated by STM32CubeMX in main.c is defined as follows:

void assert_failed(char *file, uint32_t line) {}

The protoypte of this function should be below as mentioned in Release notes:

void assert_failed(uint8_t *file, uint32_t line) {}

Error 2:

MX version: STM32CubeMX 5.4.0

Firmware: STM32Cube_FW_F0_V1.11.0

Compiler: IAR

MCU: STM32F042

Compiling error:

Error[Pe136]: “… stm32f0xx_hal_crc.h has no field "DefaultPolynomialUse�? “

Analysis:

On the one hand, the generating Polynomial in CRC peripheral of STM32F042 is not programmable, the macro CRC_POL_POL is undefined, as a result, DefaultPolynomialUse is not a member of struct CRC_InitTypeDef.

On the other hand, the code generated by STM342CubeMX has the statement with DefaultPolynomialUse as follows:

hcrc.Init.DefaultPolynomialUse = DEFAULT_POLYNOMIAL_ENABLE;

Error 3:

MX version: STM32CubeMX 5.4.0

Firmware: STM32Cube_FW_F0_V1.11.0

Compiler: IAR

MCU: STM32F072

Linker error:

Error[Li005]: no definition for "HAL_CRCEx_Init" [referenced from … crc.o]

Analysis:

The code in function MX_CRC_Init() generated by STM32CubMX has the statements below:

if (HAL_CRCEx_Init(&hcrc) != HAL_OK) …

As mentioned in Release notes, HAL_CRCEx_Init has been abandoned and undefined and should not be used.

Recommendations on STM32CubeMX:

R1: A specific channel or mailbox should be created or provided to make developers submitting bug report conveniently.

R2: The path where the STMCubMX Repository should be configurable by developers.

Labels:
11 REPLIES 11
Khouloud ZEMMELI
ST Employee

‎2019-11-26 11:19 PM

​hello @TNaxi​ ,

Could you please share your iocs files for each error ?

Thanks,

Khouloud.

0 Kudos
Khouloud ZEMMELI
ST Employee

‎2019-11-27 12:13 AM

@TNaxi​ : Only error 2 is reproduced -> it will be fixed.

need your ioc file for error 1 and for error 3.

Thanks and Best Regards,

Khouloud

​

0 Kudos
TNaxi
Associate II
In response to Khouloud ZEMMELI

‎2019-11-27 05:53 PM

Dear Khouloud Zemmeli,
The attachment is the ioc file we used.
Thanks and Best Regards,
Tian Naxin
0 Kudos
Pavel A.
Evangelist III
In response to TNaxi

‎2019-11-27 06:53 PM

> R2: The path where the STMCubMX Repository should be configurable by developers.

The path is already configurable.

What you probably want is to have two separate independent repository paths: A. for CubeMX itself to install & update its templates(?) etc. and B. the path to use in generated projects when user chooses to create references vs. copy files.

Like it was in older Cube versions.

-- pa

0 Kudos
Khouloud ZEMMELI
ST Employee
In response to TNaxi

‎2019-11-27 11:04 PM

​@TNaxi​  I can not see any attachement. 

0 Kudos
TNaxi
Associate II
In response to TNaxi

‎2019-11-28 12:32 AM

I copy the content of our ioc file as below:

#MicroXplorer Configuration settings - do not modify
CRC.CRCLength=CRC_POLYLENGTH_16B
CRC.DefaultInitValueUse=DEFAULT_INIT_VALUE_ENABLE
CRC.DefaultPolynomialUse=DEFAULT_POLYNOMIAL_DISABLE
CRC.IPParameters=DefaultPolynomialUse,DefaultInitValueUse,CRCLength
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32F0
Mcu.IP0=CRC
Mcu.IP1=NVIC
Mcu.IP2=RCC
Mcu.IP3=SYS
Mcu.IPNb=4
Mcu.Name=STM32F072R(8-B)Tx
Mcu.Package=LQFP64
Mcu.Pin0=VP_CRC_VS_CRC
Mcu.Pin1=VP_SYS_VS_Systick
Mcu.PinsNb=2
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F072RBTx
MxCube.Version=5.4.0
MxDb.Version=DB.5.0.40
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
PCC.Checker=false
PCC.Line=STM32F0x2
PCC.MCU=STM32F072R(8-B)Tx
PCC.PartNumber=STM32F072RBTx
PCC.Seq0=0
PCC.Series=STM32F0
PCC.Temperature=25
PCC.Vdd=3.6
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=true
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=true
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=false
ProjectManager.DeviceId=STM32F072RBTx
ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x20
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=2
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=CuC.ioc
ProjectManager.ProjectName=CuC
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=EWARM V8.32
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_CRC_Init-CRC-false-HAL-true
RCC.CECFreq_Value=32786.88524590164
RCC.FamilyName=M
RCC.HSICECFreq_Value=32786.88524590164
RCC.IPParameters=CECFreq_Value,FamilyName,HSICECFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,TimSysFreq_Value,VCOOutput2Freq_Value
RCC.PLLCLKFreq_Value=16000000
RCC.PLLMCOFreq_Value=16000000
RCC.TimSysFreq_Value=8000000
RCC.VCOOutput2Freq_Value=8000000
VP_CRC_VS_CRC.Mode=CRC_Activate
VP_CRC_VS_CRC.Signal=CRC_VS_CRC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=custom
0 Kudos
Abhishek Deouskar
Associate III

‎2019-11-28 01:06 AM

I am facing issues in the CAN section of the STM32Cube_FW_F0_V1.11.0.

My .ioc file is attached for your reference.

The HAL_CAN_AddTxMsg(..args..) goes to Hardfault Handler at the line:

      /* Store the Tx mailbox */
      *pTxMailbox = (uint32_t)1 << transmitmailbox;

I wrote a simple snippet for CAN Transmit as: 

void TransmitCAN(uint32_t StdID, uint8_t *data_arr, uint8_t DLC)
{
	CAN_TxHeaderTypeDef	TxMsg = {0};
 
	TxMsg.StdId = StdID;
	TxMsg.IDE = CAN_ID_STD;
	TxMsg.RTR = CAN_RTR_DATA;
	TxMsg.DLC = DLC;
	TxMsg.TransmitGlobalTime = DISABLE;
 
	HAL_CAN_AddTxMessage(&hcan, &TxMsg, data_arr, (uint32_t*)CAN_TX_MAILBOX0);
 
	if((hcan.Instance->TSR & CAN_TSR_TXOK0) != RESET)
	{
		if((hcan.Instance->TSR & CAN_TSR_TXOK1) != RESET)
		{
			if((hcan.Instance->TSR & CAN_TSR_TXOK2) != RESET)
			{
				Error_Handler();
			}
		}
	}
}

I called the same in a while(1) loop in main.c…

The same code works for F4 or F3 series controllers. Also the code I had written for CAN using the V1.9 for the same board works. So I have eliminated Hardware issues at my end.

F0_V1.11.ioc
0 Kudos
Khouloud ZEMMELI
ST Employee
In response to TNaxi

‎2019-11-28 01:37 AM

​Ok Thanks for the share, for the 3rd problem it's reproduced now,

And it will be fixed too.

Still the 1er error, need your ioc file , just copy the content of our ioc file as you have already did .

Best Regards,

Khouloud.

0 Kudos
TNaxi
Associate II
In response to TNaxi

‎2019-11-28 03:08 AM

#MicroXplorer Configuration settings - do not modify
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32F0
Mcu.IP0=NVIC
Mcu.IP1=RCC
Mcu.IP2=SYS
Mcu.IPNb=3
Mcu.Name=STM32F042K(4-6)Tx
Mcu.Package=LQFP32
Mcu.Pin0=VP_SYS_VS_Systick
Mcu.PinsNb=1
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F042K6Tx
MxCube.Version=5.4.0
MxDb.Version=DB.5.0.40
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
PCC.Checker=false
PCC.Line=STM32F0x2
PCC.MCU=STM32F042K(4-6)Tx
PCC.PartNumber=STM32F042K6Tx
PCC.Seq0=0
PCC.Series=STM32F0
PCC.Temperature=25
PCC.Vdd=3.6
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=true
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=true
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=false
ProjectManager.DeviceId=STM32F042K6Tx
ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=true
ProjectManager.HeapSize=0x20
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=2
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=DuD.ioc
ProjectManager.ProjectName=DuD
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=EWARM V8.32
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false
RCC.CECFreq_Value=32786.88524590164
RCC.FamilyName=M
RCC.HSICECFreq_Value=32786.88524590164
RCC.IPParameters=CECFreq_Value,FamilyName,HSICECFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,TimSysFreq_Value,VCOOutput2Freq_Value
RCC.PLLCLKFreq_Value=16000000
RCC.PLLMCOFreq_Value=16000000
RCC.TimSysFreq_Value=8000000
RCC.VCOOutput2Freq_Value=8000000
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=custom


------------------ 原始邮件 ------------------
�?�件人: "ST Community" �?��?时间: 2019年11月28日(星期四) 下�?�5:37
收件人: "神散形�?散"<673882715@qq.com>;

主题: Khouloud Zemmeli answered you: A lot of errors in STM32Cube_FW_F0_V1.11.0

​Ok Thanks for the share, for the 3rd problem it's reproduced now, And it will be fixed too. Still the 1er error, need your ioc file , just copy the content of our ioc file as you have already did . Best Regards, Khouloud.  
 
   
    Khouloud Zemmeli (ST Employee)


​Ok Thanks for the share, for the 3rd problem it's reproduced now,

And it will be fixed too.

Still the 1er error, need your ioc file , just copy the content of our ioc file as you have already did .

Best Regards,

Khouloud.
 
View/Answer   or reply to this email
 
 
     
 
Replying to
 
A lot of errors in STM32Cube_FW_F0_V1.11.0
 
    6738827151.541988037532413E12 (Community Member)
Wednesday, November 27, 2019 5:53 PM
Dear Khouloud Zemmeli,
The attachment is the ioc file we used.
Thanks and Best Regards,
Tian Naxin
 
 
     
 

  6738827151.541988037532413E12 (Community Member)
I copy the content of our ioc file as below:
#MicroXplorer Configuration settings - do not modify
CRC.CRCLength=CRC_POLYLENGTH_16B
CRC.DefaultInitValueUse=DEFAULT_INIT_VALUE_ENABLE
CRC.DefaultPolynomialUse=DEFAULT_POLYNOMIAL_DISABLE
CRC.IPParameters=DefaultPolynomialUse,DefaultInitValueUse,CRCLength
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32F0
Mcu.IP0=CRC
Mcu.IP1=NVIC
Mcu.IP2=RCC
Mcu.IP3=SYS
Mcu.IPNb=4
Mcu.Name=STM32F072R(8-B)Tx
Mcu.Package=LQFP64
Mcu.Pin0=VP_CRC_VS_CRC
Mcu.Pin1=VP_SYS_VS_Systick
Mcu.PinsNb=2
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F072RBTx
MxCube.Version=5.4.0
MxDb.Version=DB.5.0.40
NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
PCC.Checker=false
PCC.Line=STM32F0x2
PCC.MCU=STM32F072R(8-B)Tx
PCC.PartNumber=STM32F072RBTx
PCC.Seq0=0
PCC.Series=STM32F0
PCC.Temperature=25
PCC.Vdd=3.6
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=true
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=true
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=false
ProjectManager.DeviceId=STM32F072RBTx
ProjectManager.FirmwarePackage=STM32Cube FW_F0 V1.11.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x20
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=2
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=CuC.ioc
ProjectManager.ProjectName=CuC
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=EWARM V8.32
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_CRC_Init-CRC-false-HAL-true
RCC.CECFreq_Value=32786.88524590164
RCC.FamilyName=M
RCC.HSICECFreq_Value=32786.88524590164
RCC.IPParameters=CECFreq_Value,FamilyName,HSICECFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,TimSysFreq_Value,VCOOutput2Freq_Value
RCC.PLLCLKFreq_Value=16000000
RCC.PLLMCOFreq_Value=16000000
RCC.TimSysFreq_Value=8000000
RCC.VCOOutput2Freq_Value=8000000
VP_CRC_VS_CRC.Mode=CRC_Activate
VP_CRC_VS_CRC.Signal=CRC_VS_CRC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=custom
Thursday, November 28, 2019 12:32 AM
 
 
   
 

  Khouloud Zemmeli (ST Employee)

​Ok Thanks for the share, for the 3rd problem it's reproduced now,

And it will be fixed too.

Still the 1er error, need your ioc file , just copy the content of our ioc file as you have already did .

Best Regards,

Khouloud.
Thursday, November 28, 2019 1:37 AM
   
 
 
 
   
You're receiving emails when someone "Comments on my posts."
 
To change or turn off ST Community email, log in as 673882715@qq.com.st.
 
Are notifications about this post getting annoying? Reply to this email with the word " mute ".
 
STMicroelectronics N.V.
 

 
 
 
0 Kudos
Top