STM32G0x1 USB?

[waclawek.jan]

https://www.st.com/en/microcontrollers/stm32g0-series.html?icmp=tt9016_gl_****_dec2018&querycriteria=productId=SS1960 :

but on https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-mainstream-mcus/stm32g0-series/stm32g0x1.html?querycriteria=productId=LN2048 there is no mention of USB HOST/DEV, not even in the future products.

Is this some oversight, or are 'G0x3 with USB planned?

JW

PS. Can that picture on website be provided in higher resolution, please?

[Uwe Bonnes]

The G0 series looks like an overhaul of F0. STM32F071 also has no USB, only F072 has. Hopefully a G072 is planned. I Expect the mention of USB on G071 is an error.

[Imen.D · Accepted solution]

Hello,

USB HOST/DEV is not supported yet, but the part number supporting it will arrive rapidly.

Kind Regards,

Imen

[waclawek.jan]

Thanks, Imen, for the info.

Jan

[kyrreaa]

OK. IT's been a year... "Can I has USB?"

Still no G0x3 with any USB?

[Imen.D]

Hi @kyrreaa​ ,

It is in development, target end of next year in mass production.

Best Regards,

Imen

[Benjamin Rockwell]

So when you said "the part number supporting it will arrive rapidly", you meant 2 years?

[JDUMA]

​Hi, the USB is planned in the G0 series by Q2 next year. If you need both USB PD and USB data in your design, I suggest you to have a look on the STM32G4x1 value line series that support those functionalities. Best regards.

[waclawek.jan]

Hi Jean-Philippe @JDUMA​  ,

Thanks for the info.

The G4x1 have only USB Device. As shown in initial post, the G0 is promised to have HOST/DEV, is that true? If so, will it be again the Synopsys OTG, or something different?

Thanks,

Jan

[JDUMA]

​Hello

please have a look on the STM32G4 datasheet . It has both USB 2.0 FS data interface and USB PD.

BR, JP