cancel
Showing results for 
Search instead for 
Did you mean: 

Need help for STM32F4 TCP/IP connection

d239955_st
Associate
Posted on May 08, 2014 at 08:55

Hey,

I�m using the STM32F407ZG from the mikroe TFT starter kit. Now I want to get an Ethernet Connection with mikroemedia shield. The Connection should work over TCP/IP and DHCP can�t be used. I�m trying the example from the libstock site but I don�t get a physical Connection at least.

I�m using the Net_Ethernet_Intern_STM32 libary from Libstock.

When I try to initialize Ethernet then the linker hung up, if I comment it out then it works like before.  Can anybody help me ?

Thanks a lot

#tcp/ip #stm32 #ethernet
1 REPLY 1
Posted on May 08, 2014 at 13:22

When I try to initialize Ethernet then the linker hung up, if I comment it out then it works like before.  Can anybody help me ?

I'm not using mikroemedia or libstock, so probably not much.

If I decipher that properly, it hanging up in the reset/init code, probably stuck in a loop if you looked with a debugger. Most such problems relate to the clocking and PHY issues. Generating the correct clocks at 25/50 MHz, and configuring the correct pins for the mode used.

Tips, Buy me a coffee, or three.. PayPal Venmo
Up vote any posts that you find helpful, it shows what's working..