EVAL6480H board R1.1 version J6 label problem

[cliang]

Posted on March 04, 2015 at 15:30

Hi,

I bought EVAL6480H board which is R1.1 version. On the board, J6 pin 4 labeled GND, however, if you look at the layout, pin 4 actually tied to VS. I used DMM to measure continuity to verify that GND connects to VS. Is this a mistake? #eval6480h-gnd-tied-to-vs

[Enrico Poli]

Posted on April 08, 2015 at 10:28

Hi,

I confirm there is an error in the silkscreen of the board. The labels are flipped compared to the actual connections: Reagdrs Enrico