what is eDesignStudio?

[Nickname12656_O]

Posted on February 02, 2010 at 14:32

eDesignStudio simplifies power supply design and offers to designers the flexibility to choose the right products and topologies. 

A full design is generated from the high-level requirements specified by user and provides:

• all relevant parameters and results
• a full and interactive schematic
• a full and interactive bill of materials (BOM)
• a full set of analysis diagrams

The user can fine tune the proposed design by adding more advanced constrains for stability performance and component selection. #edesignstudio-simulation #transistors-stgw45hf60wd #e-design-studio

[vilas]

Posted on May 29, 2010 at 08:09

Hello,

I had to remove the tag you inserted as it was not set appropriately. Here below the text inserted in the Tags field:Hello Sir , I use ST e-Design studio for Vin 12-24Vdc to Vout 12Vdc , 1A Conversion i.e.Dc/Dc buck Application. But I didn't get any solution for any range of Dc/Dc Boost Application.Do we have any Solution for this?Best regards Peppe

[M. Palano]

Posted on May 31, 2010 at 11:03

Hello Sir,

First of all let me thank You for your interest on ST products.

If you try to select a higher value for Vin-min (Example 12.1), you will get the some solution.

So: Vin 12.1-24Vdc to 12Vdc Vout, 1A conversion could be a better specification.

The Problem is that to get 12Vin to 12Vout conversion requires a buck converter with 100% DutyCycle and at the moment this tool doesn't provide solutions like that.

---------------------------------------------------------------------------------

From: Vilas Parte

Posted: Saturday, May 29, 2010 8:09 AM

Subject: what is eDesignStudio?

Hello Sir , I use ST e-Design studio for Vin 12-24Vdc to Vout 12Vdc , 1A Conversion i.e.Dc/Dc buck Application. But I didn't get any solution for any range of Dc/Dc Boost Application.Do we have any Solution for this?

[vilas]

Posted on June 02, 2010 at 10:22

.ExternalClass1CBF272D79CF4908A94EDBEB44CE79C9 p.MsoNormal, .ExternalClass1CBF272D79CF4908A94EDBEB44CE79C9 li.MsoNormal, .ExternalClass1CBF272D79CF4908A94EDBEB44CE79C9 div.MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:'Calibri','sans-serif';} .ExternalClass1CBF272D79CF4908A94EDBEB44CE79C9 .MsoChpDefault {font-size:10.0pt;} @page Section1 {size:8.5in 11.0in;margin:1.0in 1.0in 1.0in 1.0in;} .ExternalClass1CBF272D79CF4908A94EDBEB44CE79C9 div.Section1 {page:Section1;}

While Searching on my.st.com I came across L6920 (DC/DC Step Up Converter).

(Reference : my.st.com -> ordering -> e samples ->Product class family -> Power management -> Dc/DC Conversion -> Step Up -> L6920)

But this Part number is not present on ST e-Design Studio.

Then How can we Design using this part?

Kindly Guide and Rectify if I am wrong.

[kiran23]

Posted on June 10, 2010 at 14:39 Hello Sir,                 Where i can get edesign Tool.

[vilas]

Posted on June 11, 2010 at 08:39

Dear Kiran,

Kindly Follow following link for ST e-Design tool. with the help of this design tool you will get complete dc/dc design, BOM (in *.pdf format if you want.). http://www.st.com/stonline/domains/support/simulators_tools.htm

[extruderplast]

Posted on April 30, 2015 at 18:37

Dear friend, please tell me to whom I should contact to buy transistors STGW45HF60WD in series 10? You can give me the email address of the sales Manager?

Please write me the answer to my address: extruderplast@mail.ru

For earlier thanks a lot!

Best regards,

Dima Bond