2018-02-28 03:16 AM
Hello,
ds11532 rev 6 on page 153 in table 57 talks about a maximum supply voltage of 3.0 volt with 32-bit flash program operation. This number seems inconsistant with a maximum voltage of 3.6 for 8 and 16 bit flash programming. The F74x datasheet also has 3.0 Volt as maximum for 32-bit programming?
2018-03-05 03:34 AM
Can anybody care for this question?
2018-03-05 05:14 AM
Note that this is essentially a user-to-user forum.
If you want direct ST support, you will need to contact ST direct - possibly via your distributor.
2018-03-05 06:28 AM
Hi
Bonnes.Uwe
,You are right: 3V is wrong as maximum programming voltage with 32-bit program, it has to be replaced by 3.6 as we can see in the relevant reference manual:
This is reported to be fixed in STM32F7 datasheets. Thanks for highlighting.
-Amel
To give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.
2018-03-05 06:37 AM
Andrew, did you really have a look at the datasheet problem I report? Are obvious datasheet error really things that should get reported to the FAEs?