SPI as full/half duplex

[elharrar]

Posted on February 01, 2012 at 15:17 Hi all , A simple question: I have an external ADC, and to get the values, I need to generate cyles to obtain the values. My SPI is configured as master + fullduplex mode and to receive bytes I have to send a dummy byte for each received byte. Now according to the datasheet I don't want send anything ( don't send this dummy byte) , I want only play with the clock and receive the values because my MOSI line should stay at ''0''. What do I have to do ? What do you think if after the init of my external adc I reconfigure my SPI as half duplex ( Master + receiver ) ? It should help me ? If yes , which API I have to use ? #spi-full/half-duplex

[Tesla DeLorean]

Posted on February 01, 2012 at 15:48

So why wouldn't sending a zero byte achieve exactly what you want?

Half-duplex means the input/output are connected together. Sending ''nothing'' is a bit vague, people here would look at the datasheet if they could guess what part you're talking about.

[emalund]

Posted on February 01, 2012 at 17:16

Now according to the datasheet I don't want send anything ( don't send this dummy byte) , I want only play with the clock and receive the values because my MOSI line should stay at ''0''.

What do I have to do ? you have to read the SPI standard Erik

[elharrar]

Posted on February 05, 2012 at 12:51 Sorry this post is idiot ... I send ''0'' to play with the clock only and receive datas Thanks