Posted on January 09, 2014 at 12:31Hello,
I like to program my STM32F103 with the ST-link/V2 device by using openOCD.
However I got next message:
Error: flash write failed at address 0x80016f8
Error: error writing to flash at address 0x08000000 at offset 0x00000000
By using the ST-link Utility, it works fine with the same programmer.
I am using the stm32f1x_stlink.cfg target script and next openocd script for writing:
I call this script from my makefile (IMGFILE is my binary)
roc stm_flash {IMGFILE} {
reset halt
sleep 10
wait_halt 2
flash write_image erase $IMGFILE 0x08008000
sleep 10
verify_image $IMGFILE 0x08008000
sleep 10
reset run
}
Does anyone has an idea what is going on?
Regards Evert Huijben
Here is the complete logging:
make program
Open On-Chip Debugger 0.6.1 (2014-01-08-11:14)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
adapter speed: 1000 kHz
srst_only separate srst_nogate srst_open_drain
Info : clock speed 1000 kHz
Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints
stm_erase
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08000160 msp: 0x20000400
auto erase enabled
Info : device id = 0x20036410
Info : flash size = 128kbytes
Error: flash write algorithm aborted by target
target state: halted
target halted due to breakpoint, current mode: Thread
xPSR: 0x01000000 pc: 0x08000160 msp: 0x20000400
Error: flash write failed at address 0x80016f8
Error: error writing to flash at address 0x08000000 at offset 0x00000000
Runtime Error: /home/evert/sandbox/multi_IO/projects/chibiOs/make/../../../boards/multiIo/stm32f1-openocd.cfg:12:
in procedure 'stm_flash'
in procedure 'flash' called at file ''/home/evert/sandbox/multi_IO/projects/chibiOs/make/../../../boards/multiIo/stm32f1-openocd.cfg'', line 12
make: Nothing to be done for `program'.
#openocd
