cancel
Showing results for 
Search instead for 
Did you mean: 

Build Tools for SP5Studio

guo qiang
Senior
Posted on October 17, 2017 at 11:56

I would like to add some source files to the source folder. the files name are :clock.c   and so on.

0690X00000608dBQAQ.png

but

build faild.

I know that this is a problem in the makefile, and SP5Studio provides  clock.c�?components.c .and My source files also have Clock.c and components.c...Causes the makefile rule to check for an error.

I think you should develop an eclipse plugin,like this:

0690X00000608V3QAI.png

In this case, the generated Makefile will not appear above the error

1 ACCEPTED SOLUTION

Accepted Solutions
Erwan YVIN
ST Employee
Posted on October 18, 2017 at 09:19

Hello , 

on a SPC5Studio project , the Makefile is automatically generated (Freemarker)

it is a good idea , we have created a change request for this.

            Best Regards

                           Erwan

View solution in original post

4 REPLIES 4
guo qiang
Senior
Posted on October 18, 2017 at 02:35

carannante.procolo

Yvin.Erwan

simon.scullion

bertrand.quesada

Erwan YVIN
ST Employee
Posted on October 18, 2017 at 09:19

Hello , 

on a SPC5Studio project , the Makefile is automatically generated (Freemarker)

it is a good idea , we have created a change request for this.

            Best Regards

                           Erwan

Posted on October 18, 2017 at 10:29

I saw the eclipse has provided a seemingly similar plug-in, anyway, looking forward to the Build plugin ~

Step 1:

0690X00000608fBQAQ.png

step 2:

0690X00000608ZZQAY.png

By the way, I am currently the RT-Thread RTOS ported to SPC5604B.

https://github.com/RT-Thread/rt-thread

ask a question

Can I debug SPC5604 with PE debugger of MPC5604?

Because the PLS debugger is too expensive.

I have a PE debugger that probably costs $ 30

Posted on October 18, 2017 at 10:45

Hello Guo ,

No problem for this ,

you can install it from  

https://www.pemicro.com/blog/index.cfm?post_id=124

 by update site mecanism . The link is on the blog

Choose e200 target and create your de 

Install is OK

It is not fully tested on our side. We have not PEMicro debugger.

i think that it should work if you create your appropriate debug configurations

0690X00000608ZsQAI.png

      Best regards

                     Erwan