STM32CUBE MX and KEIL5 IDE

[Kumar B]

Posted on March 18, 2018 at 08:30

Hi, I have been using STM32CUBEMX ide for building the code with Keil5 IDE. The issue or bug is the code is working fine when I am placing my code in the main function. But, when I create my own file or outside the main function in it is not affecting the main() function. 

Here is the main function that is working. I have highlighted the working lines with bold letters.

But, when I use the same lines of code in a function or outside the file it is not working why?

int main(void)

{/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/* MCU Configuration----------------------------------------------------------*/

/* Reset of all peripherals, Initializes the Flash interface and the Systick. */

HAL_Init();

/* USER CODE BEGIN Init */

/* USER CODE END Init */

/* Configure the system clock */

SystemClock_Config();

/* USER CODE BEGIN SysInit */

/* USER CODE END SysInit */

/* Initialize all configured peripherals */

MX_GPIO_Init();MX_ADC1_Init(); while (1){HAL_ADC_Start(&hadc1);adcval=HAL_ADC_GetValue(&hadc1);Batval=(adcval*2.998)/256;HAL_ADC_Stop(&hadc1);HAL_Delay(1000);

}

void my fun(void)

{

HAL_ADC_Start(&hadc1);

adcval=HAL_ADC_GetValue(&hadc1);Batval=(adcval*2.998)/256;HAL_ADC_Stop(&hadc1);HAL_Delay(1000);

}

Can anyone help me out?

[Bogdan Golab]

Posted on March 18, 2018 at 08:39

What error do you get? What does not work?

Is the my_fun() called from the main?

What about the Batval/adcval  variables? Are they global to be accessible from the my_fun() - they are not declared inside my_fun()...

Etc, etc, etc...

[Kumar B]

Posted on March 18, 2018 at 09:12 The original post was too long to process during our migration. Please click on the provided URL to read the original post. https://st--c.eu10.content.force.com/sfc/dist/version/download/?oid=00Db0000000YtG6&ids=0680X000006I6uj&d=%2Fa%2F0X0000000bxu%2FpU2exFZUGzkAU20BFV7Tn2_a37JrWCR9SX9hnjZfdgs&asPdf=false

[Bogdan Golab]

Posted on March 18, 2018 at 09:28

You put the function definition code inside the main so the program shall not compile.

void myfun(void)

{

HAL_ADC_Start(&hadc1);

adcval=HAL_ADC_GetValue(&hadc1);Batval=(adcval*2.998)/256;HAL_ADC_Stop(&hadc1);HAL_Delay(1000);

}

[Bogdan Golab]

Posted on March 18, 2018 at 09:30

Function definition shall be outside the main().

Beside what do you mean by 'not accessible'. Do you refer to these global vars inside the main? Does the program compile?

[Kumar B]

Posted on March 18, 2018 at 09:13 The original post was too long to process during our migration. Please click on the provided URL to read the original post. https://st--c.eu10.content.force.com/sfc/dist/version/download/?oid=00Db0000000YtG6&ids=0680X000006I6fV&d=%2Fa%2F0X0000000bso%2FiXtnzNbNCzJuNgH97_C1EYk4fc3uJKXLtkVo17kq3VE&asPdf=false

[Kumar B]

Posted on March 18, 2018 at 10:01

Sorry, I have wrongly, pasted the code. Actually, that function is outside the main function only and the variables adcval and Batval are global. Is something wron with error handlers when I use the funtion outside the main. 

[Kumar B]

Posted on March 18, 2018 at 10:07

Yes the program compiles and my code works fine with main but not with the function

[Bogdan Golab]

Posted on March 18, 2018 at 10:11

Could please share what does not work. Be precise.

[Bogdan Golab]

Posted on March 18, 2018 at 10:15

Please share:

1. The whole code which does not work

2. What is expected

3. What goes wrong