Processor is in unknown state!

Wilhelm Bairlein · ‎2018-01-08

Posted on January 08, 2018 at 16:10

hello everybody,

we use the SPC56EL70 discovery board with Spc5 studio as IDE and UDE STK - 4.8 as Debugger.

Today we got the following failure message - please see the following picture.

The only thing we changed was the additional usage of the A/D-port E12. After downloading the extended code we got the above failure message. Now we can�t flash the SPC with another source code.

Please let us know how we can put the SPC back into operation.

Thanks in advance.

#processor-in-unknown-state

david tomsa · ‎2018-01-08

Posted on January 09, 2018 at 06:59

Hi,

you can try the following: Interface Setup -> Connect and choose under connect: Keep application running.

View solution in original post

david tomsa · ‎2018-01-08

Posted on January 09, 2018 at 06:59

Hi,

you can try the following: Interface Setup -> Connect and choose under connect: Keep application running.

Erwan YVIN · ‎2018-01-09

Posted on January 09, 2018 at 10:10

Hi ,

Yes , in LSM (Lock Step Mode) , you should update your debug configuration

Wilhelm Bairlein · ‎2018-01-09

Posted on January 09, 2018 at 15:15

Hi Erwan,

how can I update the debug configuration respectively which settings do you mean?